Install New Firmware

This option allows you to install new firmware onto your sensor or onto your analog-out unit.

For Sensor firmware

Simply follow the instructions on anb_utils

For Analog-out firmware

1. Download the latest analog-out firmware from our website and put it in the same folder as anb_utils
2. Connect to anb_utils

Connecting to Serial Port: COM5 Baud Rate 57600

PCB Version:                        STM / IB
Sensor Type:                        AQ2_5m
Serial Number:                      300239
Current Interface Firmware Version: IB_10.0  New firmware installation available!
Current Driver Firmware Version:    STM_10.0  New firmware installation available!
Current Status:                     Idle

Analog Data Transfer Unit Settings

Firmware Version                    DTUA2.9
Serial Number                       500012

Main Menu - What would you like to do?

1 Measurement Settings
2 Install new Firmware
3 Command Line Prompt
4 Download CSV Data from Sensor 
5 Backup CSV Data to ANB Cloud

Enter your choice:

Select 'option 2' and the following message will be displayed:

Would you like to download and install the latest firmware from anbsensors.com? [y/n]

Select 'n' and your downloaded firmware will appear in the list.

Select a firmware file to install:

1 DTU_A_2.hex


* Once installation begins, please ensure continuous power.

Enter file [1-1]:

Choose the firmware you want to upload to your sensor and follow the on-screen instructions to power cycle. The firmware installation will then start with a percentage completion countdown.

tip

If you can't see your downloaded firmware in the list, make sure you have placed it in your anb_utils folder.

For further support please contact support@anbsensors.com