Skip to main content

XLink 500

Getting started with your ANB Sensor on the XLink 500 is simple and quick:

  1. Download this XLink Folder, unzip and copy it onto a USB thumb drive.
  2. Ensure the folder structure remains as follows: sutron/xlink/AllStations_setup.txt
  3. Insert the thumb drive into the XLink 500.
  4. The XLink 500 will automatically detect the file and install the measurement settings contained in the text file.
  5. The measurements are: pH, Temperature,Salinity, Conductivity, Transducer Health and Sensor Diagnostics.

For further support please contact support@anbsensors.com