Skip to main content

Command Line Prompt

This option provides access to additional BMS commands. Additionally, you can view the live data stream while the sensor is in operation.

********************************************************************
                   ANB SENSORS
     Sensor Type                 : BMS
     Sub System Type             : BMS_900
     BMS Firmware Version        : BMS_3.17     Latest firmware installed!
     BMS Serial Number           : 180001
     System Date (MM/DD/YY)      : 04/25/25
     System Time (24 Hour)       : 12:20:00
     Device Connected            : ANB Sensor
     SD Card                     : Enabled
     Battery Voltage Status      : 8.0
     Battery Voltage Maximum     : 22.0
     Battery Discharge Threshold : 8.0
********************************************************************

Main Menu - What would you like to do?

1 Modify Settings
2 Install New Firmware
3 Command Line Prompt
Select option 3. Command Line Prompt from the main menu in anb_utils and the following commands will be displayed:

BMS COMMANDS
******************
VERSION         Display the BMS firmware revisions, serial number and time
TIME            Change the date and/or time
RESUME          Resume BMS operation
REBOOT          Restart the BMS

Type chosen command OR ctrl-c to exit to main menu.
******************

VERSION​

Type version to display the splash screen. This will take ~10s.

********************************************************************
     Sensor Type                 : BMS
     Sub System Type             : BMS_900
     BMS Firmware Version        : BMS_3.17     Latest firmware installed!
     BMS Serial Number           : 180001
     System Date (MM/DD/YY)      : 04/25/25
     System Time (24 Hour)       : 12:20:00
     SD Card                     : Enabled
     Battery Voltage Status      : 8.0V
     Battery Voltage Maximum     : 22.0V
     Battery Discharge Threshold : 8.0V
********************************************************************

This pauses the BMS operation. To restart operation type resume

TIME​

Type time to change the internal clock and/or calendar.

You can accept the current date/time or input new values:

To enter new date: MM/DD/YYYY
To enter new time: HH:MM

If a new date is entered, a new results file will be created.

This pauses the BMS operation. To restart operation type resume

RESUME​

Type resume to restart the BMS operation. To be used after a VERSION or TIME command.

REBOOT​

Type reboot to power cycle the BMS and trigger the Sensor Detection Sequence.


For further support please contact support@anbsensors.com