Connecting to your sensor
Pigtail cabled sensors
For sensors terminated with a 6 core pigtailed cable check which wire option you have:
Connection Options | ||
---|---|---|
Option 1 | ||
Option 2 |
note
Because of the potential for different vendors to use different signal definitions, if you connect our sensors' A/B wiring to your communication device and communication does not work, try reversing the signals
SubConn cabled sensors
For sensors terminated using a MCBH6M connector, follow the pin-out below:
Pin | Function |
---|---|
1 | Ground |
2 | Power |
3 | RS232 Sensor Receive |
4 | RS232 Sensor Transmit |
5 | RS485 B - Inverting (for sensors with a serial number > 3000028) |
6 | RS485 A - Non-Inverting (for sensors with a serial number > 3000028) |
note
Because of the potential for different vendors to use different signal definitions, if you connect our sensors' A/B wiring to your communication device and communication does not work, try reversing the signals