📄️ Hardware
The OC300 will arrive packaged with a preinstalled transducer, hand tools and DTU.
📄️ Setting up with a terminal program
Connecting
📄️ Setting up sensor with modbus
Connecting
📄️ Setting up sensor with DTU
Connecting
📄️ Primary Menu
MENU – displays the main functions of the sensor as shown below:
📄️ Sensing Modes
Test mode
📄️ Sensor Output
$ANB,CRC,TIMESTAMP,PH,TEMP,SALINITY,HEALTH,CR,LF
📄️ Firmware
How to Upload new Firmware
📄️ Transducer Maintenance
How to Abrade the Transducer
📄️ Autonomous Monitoring Mode
* When the sensor is placed in autonomous mode the sensor will beep once.